Command and Processes Table - G

For more information on the terms 'Command', 'Process' and 'Macro Command', see Command Table Introduction.

These tables list all commands and processes available in all products. If your product has access to a command or process, the link on the left of the table takes you to a dedicated help file for more information. If no link appears, the function isn't available in your product.

Symbols used in this table:

A green tick indicates that the module is part of the core system licensing for the specified product - no additional module is required.

X A red cross indicates the module is not part of the listed system and any commands held within it cannot be run (a separate product will be required).

� A blue diamond indicates the module is an optional extra for the specified system.

For Macro commands, see here.

Commands - G

Command Name							Description	More Help
gaussian-wireframe-from-points			X			X	Generates a DTM or solid wireframe from a point cloud data file in memory.
generate-contours-from-points				X		X	Generate a series of contours and an output grid model from input sample points.	Command Help
generate-contours-from-holes-intercepts				X		X	Generate contours from drillhole intercepts. Wireframes can also be generated
generate-distance-contours				X		X	Generate contours of the distance from the sample points.	Command Help
generate-grids-in-outlines							Generate a regular grid of strings within selected outline string data.	Command Help
generate-outlines							Generate outlines (perimeters) from areas defined by multiple crossing strings.	Command Help
generate-outlines-attrib							Similar to the generate-outlines command (used to replace crossing strings with perimeters outlining adjacent areas), but uses the first string used in the outlining process to derive attributes for the remaining strings.	Command Help
get-all-strings							Load all (filtered) strings from a named string file.	Command Help
get-drillholes							Load all (filtered) strings from a named string file.	Command Help
get-points							Get points into memory from a named points file.	Command Help
get-view							Retrieves a specified set of view parameters from a loaded section definition table; prompting for a definition definition file if one has not yet been loaded. (Design window only)	Command Help
get-wf_data							Get data from supplied wireframe triangle and point files.	Command Help
gradient-degrees-switch							Sets the gradient convention unit to degrees.	Command Help
gradient-percent-switch							Sets the gradient convention unit to %.	Command Help
gradient-positive-up-switch							Toggle the gradient positive value convention.	Command Help
gradient-ratio-switch							Sets the gradient convention unit to ratio.	Command Help
grid-dtms						X	Create a grid of points to represent the average, minimum or maximum elevations of points belonging to multiple (and potentially overlapping) wireframe surfaces.	Command Help
group-lithology	X	X		X	X	X	define groups containing one or more lithology values.
grid-interval-on-string							Make new string vertices, based on XYZ grid intersections.	Command Help
group-selection-display							Set parameters for the display of the selected data set.	Command Help
gvp-cells-update-switch							Toggle on or off whether block model cells will be updated in the 3D window when transferring data from the Design window. .	Command Help
gvp-dhole-update-switch							Toggle on or off whether drillholes will be updated in the 3D window when transferring data from the Design window using update-vr-objects.	Command Help
gvp-gouraud-switch							Toggle on or off smooth (Gouraud) shading in the 3D window when transferring data from the Design window using update-vr-objects..	Command Help
gvp-hole-collar-bhid-switch							Toggle on or off the display of BHID labels at the collar position when transferring data from the Design window to the 3D window via update-vr-objects.	Command Help
gvp-hole-end-bhid-switch							Toggle on or off the display of BHID labels at the end of the hole when transferring data from the Design window to the 3D window via update-vr-objects.	Command Help
gvp-modelp-update-switch							Toggle on or off whether model planes will be updated in the 3D window when transferring data from the Design window using update-vr-objects.	Command Help
gvp-modelpc-update-switch							Toggle on or off whether the model cloud will be updated in the 3D window when transferring data from the Design window using update-vr-objects.	Command Help
gvp-modelwf-update-switch							Toggle on or off whether the model with wf will be updated in the 3D window when transferring data from the Design window using update-vr-objects.	Command Help
gvp-point-annot-update-switch							Toggles point annotation in the 3D window when transferring data from the design window using update-vr-objects..	Command Help
gvp-point-update-switch							Toggle on or off the updating of point data in the 3D window when transferring data from the design window using update-vr-objects.	Command Help
gvp-string-update-switch							Toggle on or off whether string data will be updated in the 3D window when transferring data from the design window using update-vr-objects.	Command Help
gvp-unload-planes-switch							Control whether previously loaded planes are removed when transferring data from the Design window to the 3D window via update-vr-objects.	Command Help
gvp-wf-update-switch							Toggle on or off whether wireframe data will be updated in the 3D window when transferring data from the Design window to the 3D window via update-vr-objects. .	Command Help

Processes - G

Process Name								Description	More Help
GAUSAN	X	X	X	X	X	X	X	Perform a gaussian anamorphose transformation on a set of sample data.
GAUSANAM	X	X	X	X	X	X	X	Transforms a variable Y with a gaussian distribution in a new variable Z, with any distribution.
GENTRA								General field transformation. Fields are transformed using one or more standard GENTRA transformation functions, field (data column) names and constants.	Process Help
GETSAMP	X	X		X	X	X	X	GETSAMP produces a sample file from a desurveyed drillhole file.	Process Help
GRADE			X		X	X	X	The process provides a choice of methods to interpolate a grade into a block model.
GRIDDC					X		X	The GRIDDC process calculates the declustered weight for a set of samples using a gridding method.
GRTON	X	X	X	X	X	X	X	Calculate grades and tonnages using results from a Gaussian anamorphosis.

For Macro commands, see here.